Electrical
Wire size & fuse calculator
A clear answer for your next DC circuit. Check voltage drop, ampacity and fuse coordination together.
From source to load. The return conductor is included automatically.
Current installation: 2 bundled conductors · engine space: no · sustained load: no. Review these below.
Installation conditions & regional settings
Calculation profile
ABYC E-11-derived planning · 105°C stranded copper. Country selection supplies installation references, not a compliance certificate.
Local installation reference: No local compliance profile verified; confirm with the relevant authority
Check local adoption and installation requirements. This tool does not certify an installation.
Inputs & assumptions
Results depend on the values and conditions you enter. Review the stated assumptions, equipment documentation and result limitations before making a purchase or starting installation.
Questions before you build
Why do short cables sometimes need to be thick?
A short run can pass the voltage-drop check and still fail the heat or fuse check. The larger requirement sets the conductor size.
Can I use the chassis as the negative return?
This calculator models a positive and a negative copper conductor. Chassis-return resistance and connections need a separate installation assessment.
Is the mm² figure a metric cable recommendation?
The AWG equivalent area describes the selected conductor. The separate standard metric figure checks voltage drop only; its thermal rating must be checked with the cable manufacturer.
Calculation sources
Numeric marine reference; not RV certification. mm² shown for an AWG cable is its equivalent conductor area, not an independently rated metric cable.
ABYC-derived 105°C stranded-copper planning profile